You can control your doorbell button's app notification setting and chiming sound.

Notification: Decide whether or not to receive a push notification on your phone when the doorbell is pressed.

Chiming Sound: If you have a Kangaroo Siren or Kangaroo Chime a tone will sound in your home when the doorbell is pressed. You can turn this on or off.

If this is on, you can:

  1. Choose the tone you want to sound.
  2. Adjust the volume of the tone
  3. Select which devices, if you have more than one Kangaroo Chime or both a Kangaroo Chime and a Kangaroo Siren + Keypad, you want the chime to sound from.

Turn Notifications on:

  1. Open your doorbell's settings. You can do this by tapping the name of your doorbell on the doorbell card shown in your camera tab.
  2. Scroll down to the section "Doorbell Press"
  3. Locate "Notifications" and toggle on

Turn on Chiming Sound and Customize:

  1. Open your doorbell's settings. You can do this by tapping the name of your doorbell on the doorbell card shown in your camera tab.
  2. Scroll down to the section "Doorbell Press"
  3. Locate and Tap "Chiming Sound"
  4. Locate "Sound" at the top of the screen and toggle on
  5. Locate the "Tones" section directly below and select a tone. This tone will sound when someone rings your doorbell.
  6. Locate "Volume" and slide to adjust to your desired volume.
  7. Locate "Sounds From" at the bottom of the screen and choose which devices you would like the sound to come from. This applies if you have more than one Kangaroo Chime or both a Kangaroo Chime and a Kangaroo Siren + Keypad.
Did this answer your question?