Resetting your Motion sensor is needed if you have changed your WiFi credentials, if the device cannot be found during pairing process and if one of our GuRoos advised.
1. Press and hold the reset button for 30seconds.
Using a pin, locate the small hole on the side of the Motion sensor. If you are having a hard time looking for a pin to use or locating the small hole, you can also slide the motion sensor up and look for a black button to press on the side of the device.
2. Wait for a blue blinking light.
Proceed with pairing once a blue light blinks while pressing and holding on the reset button.
Should you have followed all the steps provided and your Motion sensor still did not reset, kindly contact us.